6_Product_Shandong Lufa New Materials Group

Zinc Ingot

Zinc ingots are widely used in die-casting alloys, battery industry, printing and dyeing industry, pharmaceutical industry, rubber industry, chemical industry, etc. Alloys of zinc and other metals are also widely used in electroplating, spraying and other industries.

Get Quote Email Tel/Wechat/Whatsapp

Lead Ingot

Lead ingot is rectangular, with prominent ears at both ends, blue-white metal, softer.1、The surface of lead ingot shall not have slag, particles of oxygen, inclusions and foreign pollution.2、The lead ingot shall not have cold segregation, and shall not have flying edge burrs larger than 10mm (trimming is allowed).Lead ingots are divided into 5 grades according to their chemical composition, and th...

Get Quote Email Tel/Wechat/Whatsapp

FeNi 50 LC

Nickel iron is a nickel iron alloy with a nickel content of 20% -60%. The melting point of nickel iron is 1430-1480 degrees, and the density is 8.1-8.4. Mainly used as a nickel additive in steelmaking and cast iron. According to international standards (ISO), nickel iron is divided into FeNi20 (15%~25% Ni), FeNi30 (25%~35% Ni), FeNi40 (35%~45% Ni), and FeNi50 (45%~60% Ni) based on its nickel conte...

Get Quote Email Tel/Wechat/Whatsapp

FeNi20

Ferronickel is a nickel iron alloy with a nickel content of 20% -60%. The melting point of nickel iron is 1430-1480 degrees, and the density is 8.1-8.4. Mainly used as a nickel additive in steelmaking and cast iron. According to international standards (ISO), nickel iron is divided into FeNi20 (15%~25% Ni), FeNi30 (25%~35% Ni), FeNi40 (35%~45% Ni), and FeNi50 (45%~60% Ni) based on its nickel conte...

Get Quote Email Tel/Wechat/Whatsapp

FeNi 30

Ferronickel is a nickel iron alloy with a nickel content of 20% -60%. The melting point of nickel iron is 1430-1480 degrees, and the density is 8.1-8.4. Mainly used as a nickel additive in steelmaking and cast iron. According to international standards (ISO), nickel iron is divided into FeNi20 (15%~25% Ni), FeNi30 (25%~35% Ni), FeNi40 (35%~45% Ni), and FeNi50 (45%~60% Ni) based on its nickel conte...

Get Quote Email Tel/Wechat/Whatsapp

FeNi 40 HC

Nickel iron is a nickel iron alloy with a nickel content of 20% -60%. The melting point of nickel iron is 1430-1480 degrees, and the density is 8.1-8.4. Mainly used as a nickel additive in steelmaking and cast iron. According to international standards (ISO), nickel iron is divided into FeNi20 (15%~25% Ni), FeNi30 (25%~35% Ni), FeNi40 (35%~45% Ni), and FeNi50 (45%~60% Ni) based on its nickel conte...

Get Quote Email Tel/Wechat/Whatsapp

FeW 70

ferrotungsten (with a tungsten content of 70% -80%) and is an alloy composed of tungsten and iron, used as an alloy additive in steelmaking. There are two commonly used types of tungsten iron, which contain 70% and 80% tungsten. Density (20 ℃) 19.3g/cm3. Melting point 3400 ℃. Boiling point 5555 ℃.

Get Quote Email Tel/Wechat/Whatsapp

FeW 80

Ferrotungsten (with a tungsten content of 70% -80%) and is an alloy composed of tungsten and iron, used as an alloy additive in steelmaking. There are two commonly used types of tungsten iron, which contain 70% and 80% tungsten. Density (20 ℃) 19.3g/cm3. Melting point 3400 ℃. Boiling point 5555 ℃.

Get Quote Email Tel/Wechat/Whatsapp

Sponge titanium

Sponge titanium is the raw material for titanium processing materials. Generally, it is a light gray particle with a clean surface and no visible inclusions. It also includes defective sponge titanium blocks, such as burnt sponge titanium blocks, oxidized sponge titanium blocks with obvious dark yellow and bright yellow traces, oxidized and nitrogen rich sponge titanium blocks with dark yellow and...

Get Quote Email Tel/Wechat/Whatsapp

Message